China 30HP 4WD Mini Compact Farm Tractor with Rops and Sunroof pto shaft for bush hog

Item Description

Benefit of 4*4 mini farm tractor for 30hp 

one.8+2 sliding gear modify, all gears are organized in get, great adaptability in all agricultural conditions.
two. Draft /position manage hydraulic regulating method: Category I hitch: Double velocity PTO output…
three. Shut paddy entrance push axle, substantial procedure performance and suitable for paddy procedure.
4. Choices: Air brake. It can complete all farm work and transport function.
5. Bolstered PTO shaft, hi-reliability.
6. Can install popular engines like ZheJiang Yuchai, YTO manufacturers and ZheJiang lijia, powerful and reliable.

Principal gadgets
*3cylinder motor
*Hydraulic steering
*One phase clutch
*PTO: 720rpm
*Partial separated hydraulic hitch
*Clipper-constructed hood
*Gearbox: F8+R2
*Exterior air filter
*Upkeep-cost-free battery
*6 tooth spline

Alterable products
*Air issue Cabin
*Warmth Cabin
*Roll bar
*Sunlight-shade
*Airpump
*Multi-way valve
*Double speed PTO
*Double phase clutch

Technological information
 

SPECIFICATION OF QIANLI 30 Sequence FARM MINI TRACTORA
Mode  250  254  300  304  350  354
Drive Type 4×2 4×4 4×2 4×4 4×2 4×4
2WD 4 wheel drive 2WD 4WD 2WD Four wheel drive
Overall Proportions L×W×H (mm) 2950*1380*1440 3090×1450×1960
Wheelbase(mm) 1550 1560
Front tread(mm) 1100 set or 1100~ 1200 altered
Rear tread(mm) 1100 fastened or 1100-1200 modified
Min. ground clearance(mm) 320
Structure bodyweight (KG) 1500 1400 1240 1450 1240 1450
Rated traction pressure (KN) 5.72 7.two 5.88 7.four 6.twenty 7.eighty four
Tyre Front 5.5-sixteen six.-sixteen five.5-sixteen 6.-16 5.5-16 six.-16
  Rear nine.5-24 9.5-24 nine.5-24 9.5-24 9.5-24 9.5-24
Engine design Laidong385 Laidong3T30 Laidong4L22
Rated electricity (KW) 18.four 18.4 22 22 25.seven twenty five.7
Gears 8F+2R
Theoretic
pace(KW/H)
Working
gears
F 1.84~27.98 1.ninety two~29.twenty five 1.ninety six~29.83
R 2.forty two~11.18 2.53~11.sixty eight 2.58~11.ninety one
Steering kind Guide steering Hydraulic steering Guide steering hydraulic steering Manual steering hydraulic steering
Hydraulic Hitch type partial separated
Speed of PTO (r/min) 720

 

Specialized Parameters

Generation Workshop

Certification

Organization Associates

FAQ

Q1. How to ship the Tractors?
A:    By container, bulk ship, RORO.

Q2. Do you have diverse horsepower tractors?
A:   Yes,we offer diverse design tractors and exported to several nations.

Q3. What is your payment phrase?
A: We normally settle for T/T or L/C depends on the quantity. 
     T/T, deposit in progress, and equilibrium paid before supply from manufacturing unit.

This fall. Which product tractors do you supply?
A:  We source all varieties of tractors this sort of as walking tractors, wheel tractors etc,.

Q5. What is your conditions of delivery?
A:    FOB, CIF.

Q6. How about your delivery time?
A:   Generally, it will just take 35 times following getting your progress payment. The specific shipping time depends on the things and the amount of your purchase.

Q7. Do you test all your items just before supply?
A:   Yes, we have one hundred% test before supply

Q8: What can you assure to your business companion?
A:   Best value with great top quality. We promise top quality and right after sale support to fulfill our organization partners.

Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

SPECIFICATION OF QIANLI 30 SERIES FARM MINI TRACTORA
Mode  250  254  300  304  350  354
Drive Type 4×2 4×4 4×2 4×4 4×2 4×4
2WD 4WD 2WD 4WD 2WD 4WD
Overall Dimensions L×W×H (mm) 2950*1380*1440 3090×1450×1960
Wheelbase(mm) 1550 1560
Front tread(mm) 1100 fixed or 1100~ 1200 adjusted
Rear tread(mm) 1100 fixed or 1100-1200 adjusted
Min. ground clearance(mm) 320
Structure weight (KG) 1500 1400 1240 1450 1240 1450
Rated traction force (KN) 5.72 7.2 5.88 7.4 6.20 7.84
Tyre Front 5.5-16 6.0-16 5.5-16 6.0-16 5.5-16 6.0-16
  Rear 9.5-24 9.5-24 9.5-24 9.5-24 9.5-24 9.5-24
Engine model Laidong385 Laidong3T30 Laidong4L22
Rated power (KW) 18.4 18.4 22 22 25.7 25.7
Gears 8F+2R
Theoretic
speed(KW/H)
Working
gears
F 1.84~27.98 1.92~29.25 1.96~29.83
R 2.42~11.18 2.53~11.68 2.58~11.91
Steering type Manual steering Hydraulic steering Manual steering hydraulic steering Manual steering hydraulic steering
Hydraulic Hitch type partial separated
Speed of PTO (r/min) 720
Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

SPECIFICATION OF QIANLI 30 SERIES FARM MINI TRACTORA
Mode  250  254  300  304  350  354
Drive Type 4×2 4×4 4×2 4×4 4×2 4×4
2WD 4WD 2WD 4WD 2WD 4WD
Overall Dimensions L×W×H (mm) 2950*1380*1440 3090×1450×1960
Wheelbase(mm) 1550 1560
Front tread(mm) 1100 fixed or 1100~ 1200 adjusted
Rear tread(mm) 1100 fixed or 1100-1200 adjusted
Min. ground clearance(mm) 320
Structure weight (KG) 1500 1400 1240 1450 1240 1450
Rated traction force (KN) 5.72 7.2 5.88 7.4 6.20 7.84
Tyre Front 5.5-16 6.0-16 5.5-16 6.0-16 5.5-16 6.0-16
  Rear 9.5-24 9.5-24 9.5-24 9.5-24 9.5-24 9.5-24
Engine model Laidong385 Laidong3T30 Laidong4L22
Rated power (KW) 18.4 18.4 22 22 25.7 25.7
Gears 8F+2R
Theoretic
speed(KW/H)
Working
gears
F 1.84~27.98 1.92~29.25 1.96~29.83
R 2.42~11.18 2.53~11.68 2.58~11.91
Steering type Manual steering Hydraulic steering Manual steering hydraulic steering Manual steering hydraulic steering
Hydraulic Hitch type partial separated
Speed of PTO (r/min) 720

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

Shaft CollarA 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China 30HP 4WD Mini Compact Farm Tractor with Rops and Sunroof     pto shaft for bush hogChina 30HP 4WD Mini Compact Farm Tractor with Rops and Sunroof     pto shaft for bush hog
editor by czh 2023-01-07

Recent Posts