China Machinery Factory Wsl Cardan Shaft pto shaft carrier bearing

Product Description

WSL Kind Cardan Shaft(JB/T7846.two2007)

Cardan shaft is extensively used in rolling mill, punch, straightener, crusher, ship drive,paper making gear, widespread equipment, drinking water pump gear,test bench and other mechanical apps.

Cross type universal joints for straightening devices are mainly suited for flat sheet straightening equipment.
It is also suitable for other mechanical tools, whose rotation diameter is around forty six ~ 150mm, and the nominal torque is 90-6300N.m.

Axis angle <= 10

Software: straightening machine particularly for roller straightening machine and other mechanical device.

·Parameter And Principal Dimension(JB/T7846.two2007)

Type Nominal
Torque
Tn/N·m
Gear base conclude Gear base stop Straightening equipment finish L Rotary
Inertia
kg·mtwo
Max mass
kg
done L1 done L3 d2 Ltwo Dtwo Lfour
Y sort J1 type Y type J1 type
WSL1 90 20,22,24 fifty two 38 forty six 100 twenty,22,24 52 38 46 100 800 .003 seven
25,28 sixty two 44 46 one hundred 25,28 62 44 820 0.0076 9
30,32,35,38 82 sixty fifty eight a hundred and twenty
WSL2 315 thirty,32,35,38 82 60 fifty eight one hundred twenty 30,32,35,38 82 60 58 120 840 .01 12
forty,forty two,45,48,fifty 112 84 70 a hundred and sixty 880 .018 fifteen
WSL3 500 forty,42,45,forty eight,50 112 eighty four 70 a hundred and sixty 40,42,forty five,48,fifty 112 84 70 160 920 .571 19
fifty five,56 112 eighty four ninety 200 960 0.051 25
sixty,sixty three,sixty five 142 107 ninety 200
WSL4 1400 55,56 112 eighty four ninety two hundred fifty five,56 112 84 90 200 1200 .077 38
60,63,sixty five 142 107 90 200 60,sixty three,65 142 107 1210 0.sixteen 44
70,seventy one,seventy five 142 107 120 210
WSL5 4000 70,seventy one,75 142 107 one hundred twenty 210 70,71,seventy five 142 107 120 210 1200 .19 fifty four
80,85,ninety,ninety five 172 132 150 260 1270 .37 sixty five
WSL6 6300 eighty,eighty five,90,95 172 132 150 260 80,eighty five,90,ninety five 172 132 150 260 1320 .forty eight 86

·Observe:L-Installation duration

US $50-400
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: 19-32
Torque: 70-80N.M
Bore Diameter: 14mm
Speed: 6000r/M
Structure: Rigid

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Type Nominal
Torque
Tn/N·m
Gear base end Gear base end Straightening machine end L Rotary
Inertia
kg·m2
Max mass
kg
d1 L1 d1 L3 d2 L2 D2 L4
Y type J1 type Y type J1 type
WSL1 90 20,22,24 52 38 46 100 20,22,24 52 38 46 100 800 0.003 7
25,28 62 44 46 100 25,28 62 44 820 0.0076 9
30,32,35,38 82 60 58 120
WSL2 315 30,32,35,38 82 60 58 120 30,32,35,38 82 60 58 120 840 0.01 12
40,42,45,48,50 112 84 70 160 880 0.018 15
WSL3 500 40,42,45,48,50 112 84 70 160 40,42,45,48,50 112 84 70 160 920 0.023 19
55,56 112 84 90 200 960 0.051 25
60,63,65 142 107 90 200
WSL4 1400 55,56 112 84 90 200 55,56 112 84 90 200 1200 0.077 38
60,63,65 142 107 90 200 60,63,65 142 107 1210 0.16 44
70,71,75 142 107 120 210
WSL5 4000 70,71,75 142 107 120 210 70,71,75 142 107 120 210 1200 0.19 54
80,85,90,95 172 132 150 260 1270 0.37 65
WSL6 6300 80,85,90,95 172 132 150 260 80,85,90,95 172 132 150 260 1320 0.48 86
US $50-400
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: 19-32
Torque: 70-80N.M
Bore Diameter: 14mm
Speed: 6000r/M
Structure: Rigid

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Type Nominal
Torque
Tn/N·m
Gear base end Gear base end Straightening machine end L Rotary
Inertia
kg·m2
Max mass
kg
d1 L1 d1 L3 d2 L2 D2 L4
Y type J1 type Y type J1 type
WSL1 90 20,22,24 52 38 46 100 20,22,24 52 38 46 100 800 0.003 7
25,28 62 44 46 100 25,28 62 44 820 0.0076 9
30,32,35,38 82 60 58 120
WSL2 315 30,32,35,38 82 60 58 120 30,32,35,38 82 60 58 120 840 0.01 12
40,42,45,48,50 112 84 70 160 880 0.018 15
WSL3 500 40,42,45,48,50 112 84 70 160 40,42,45,48,50 112 84 70 160 920 0.023 19
55,56 112 84 90 200 960 0.051 25
60,63,65 142 107 90 200
WSL4 1400 55,56 112 84 90 200 55,56 112 84 90 200 1200 0.077 38
60,63,65 142 107 90 200 60,63,65 142 107 1210 0.16 44
70,71,75 142 107 120 210
WSL5 4000 70,71,75 142 107 120 210 70,71,75 142 107 120 210 1200 0.19 54
80,85,90,95 172 132 150 260 1270 0.37 65
WSL6 6300 80,85,90,95 172 132 150 260 80,85,90,95 172 132 150 260 1320 0.48 86

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Machinery Factory Wsl Cardan Shaft     pto shaft carrier bearingChina Machinery Factory Wsl Cardan Shaft     pto shaft carrier bearing
editor by czh 2023-01-25

Recent Posts