China Pto Shaft for Disc Mower Discbines 1340 pto shaft danger

Product Description

PTO Shaft for Disc Mower Discbines 1340

Our PTO shaft can be adapted to the types of these agricultural equipment: Hesston 1340, 1345 / some CaseIH 8312, Massy Ferguson PTD 12, New Thought 5512
First gear is 55N Weasler 80 degree on the tractor facet and a 50 diploma CV on the discbine.
Input shafts are typically 1.fifty” spherical. You should simply click listed here with your technical specs.

Portion Quantity

Tractor

Implement

Description

14656849

one.375-21

one.5″ RD clamp

55N 80×50 Double CV

none

1.5″ RD clamp

55N 50 levels CV 50 %(put into action)

one.375-21

none

55N eighty levels CV 50 %(tractor)

The PTO shaft of agricultural machinery. In the earlier, the PTO shaft was connected by a square tube. When the tractor was doing work in the field, there was a good deal of dust. Following the dust entered the square tube, the square tube and the square shaft ended up critically worn, and the expansion and contraction were not sleek, ensuing in harm to the cross bearings at each finishes. As a outcome, the pins at equally finishes of the PTO shaft are seriously worn and inconvenient to disassemble, which is simple to causes the PTO shaft to
tumble off and the PTO shaft to be destroyed. The agricultural machinery common joint PTO shaft contains a universal joint, the remaining common joint is linked with a spline sleeve, the appropriate common joint is connected with 1 stop of a spline shaft, and the spline shaft is installed in the spline sleeve, a sealing sleeve is fixed on the outer diameter of the relationship among the spline sleeve and the spline shaft, the spline sleeve is provided with a grease gap, and the grease hole is offered with a grease fitting. This item is used for rotary cultivators, micro cultivators, stubble removers, beaters, sprinkler irrigation
equipment, rotary rakes, and other agricultural machines and equipment connected with sq. tube PTO shafts in agricultural production.
What is Discbine?
In reality, CZPT coined the expression “Discbine,” which has grow to be a common title broadly employed to refer to any disc mower conditioner, no matter of brand. Which is not shocking, since even in harsh problems, a true Discbine disc mower-conditioner can rapidly change a heavy CZPT into a fast-drying bale or strip.

Installation of the PTO shaft

1.Utilize lubricating grease (No.2 file foundation grease or gear oil as required) on the common joint bearing, put together the oil seal,set it on the cross shaft, press it into the universal joint fork, telescopic sleeve fork, and flange fork holes at the front and rear transmission shaft end respectively, and then put in the go over plate and lock ring, tighten and lock it.
2.Use grease to the telescopic sleeve of the generate shaft, then set the fork on the spline shaft of the rear PTO shaft and screw the oil seal cap.
three.Connect the flange fork of the front transmission shaft with the flange of the next PTO shaft and put in the front PTO shaft on the center help bracket of the transmission shaft. Soon after combustion, put in the cross joints at equally finishes of the rear transmission shaft CZPT the flange fork of the front PTO shaft and the rear axle driving equipment shaft with bolts and tighten the flange correcting bolts and nuts.
four.PTO shaft spline sheath and cross shaft oil nozzle must be full.

We Also Provide PTO Shafts
product-group/VqTESwWofuhM/PTO-Shaft-catalog-1.html
PTO Shaft Producer
Ever-electrical power covers an spot of much more than 12000 square CZPT and employs far more than a hundred people. We focus in developing, manufacturing, and marketing PTO shafts, industrial universal shafts, auto travel shafts, common joint coupling shafts, universal joints, etc. The annual turnover is 60 million yuan and 9 million US dollars, rising yr by year. Our merchandise take pleasure in a large track record amid consumers in Europe, the United States, Asia, Australia, and North America. We are the top 3 professional OEM suppliers of a lot of agricultural device factories in the domestic market. CZPT transmission shaft adheres to our “QDP” principle: good quality initial, speedy shipping and delivery, and aggressive price tag. We have received CE, TS / 16949, and ISO9001 certification, and have systematic manufacturing gear and a QC staff to make certain our high quality and shipping. We warmly welcome pals from all walks of life to pay a visit to and establish mutually helpful lengthy-phrase cooperative relations.

Firm Details


/ Piece
|
1 Piece

(Min. Order)

###

Type: Agricultural
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Iron
Power Source: Electricity
Weight: 21kg
After-sales Service: Installation Guide 3-Year Warranty

###

Part Number
Tractor
Implement
Description
14656849
1.375-21
1.5" RD clamp
55N 80×50 Double CV
82-14656849
none
1.5" RD clamp
55N 50 degrees CV half(implement)
83-14656849
1.375-21
none
55N 80 degrees CV half(tractor)

/ Piece
|
1 Piece

(Min. Order)

###

Type: Agricultural
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Iron
Power Source: Electricity
Weight: 21kg
After-sales Service: Installation Guide 3-Year Warranty

###

Part Number
Tractor
Implement
Description
14656849
1.375-21
1.5" RD clamp
55N 80×50 Double CV
82-14656849
none
1.5" RD clamp
55N 50 degrees CV half(implement)
83-14656849
1.375-21
none
55N 80 degrees CV half(tractor)

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Shaft Collar

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Pto Shaft for Disc Mower Discbines 1340     pto shaft dangerChina Pto Shaft for Disc Mower Discbines 1340     pto shaft danger
editor by CX 2023-03-30

Recent Posts